LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2001 >> MPV DX >> Repair and Diagnosis >> External Pages >> Different car >> Section 445 (Glass/Windows/Mirrors) >> Front Power Window Regulator Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Front Power Window Regulator Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the front door glass. (See FRONT DOOR GLASS AND GUIDE REMOVAL/INSTALLATION .)
  3. Disconnect the front power window regulator connector.
  4. Remove the nuts, then remove the front power window regulator.

    Tightening torque 

    1. 6.87-9.80 N.m {70-100 kgf.cm, 60.8-86.7 in.lbf} 
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals