LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> Protege DX, Standard >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 204 (Security System And Locks System) >> Hood Switch Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Hood Switch Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove in the order indicated in the figures.
    Fig 1: Continuity Table Hood Switch
    G00991351Courtesy of MAZDA MOTORS CORP.
    Fig 2: Removing/Installing Hood Switch
    G00991352Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals