LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> Protege DX L4-1.6L DOHC >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> System Specifications >> Cylinder Head Torque & Sequence
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Cylinder Head Torque & Sequence



TIGHTENING SEQUENCE/SPECIFICATIONS






IMPORTANT: Tighten the cylinder head bolts in two or three steps in the order shown. 17.2-22.0 Nm (12.7-16.2 ft lbs)






ADDITIONAL TORQUE IN DEGREES REQUIRED
1. Place a paint mark on each bolt head. Using the marks as a reference, tighten the bolts by turning each bolt 85° - 95° in the sequence shown. Futher tighten each bolt by turning an additional 85° - 95° in the sequence shown.
scientia non olet · About LEMON Manuals