Audio Unit Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the meter hood. (See METER HOOD REMOVAL/INSTALLATION .)

Remove in the order indicated in the table/figure.

REMOVING/INSTALLING AUDIO UNIT

Component/Step No.	Component Description
1	Screw
2	Connector
3	Audio unit

Fig 1: Removing/Installing Audio Unit

Courtesy of MAZDA MOTORS CORP.

CAUTION:

Make certain that the wiring harness and antenna feeder are not caught between the unit and dashboard. If the harness or the antenna feeder is caught between the unit and dashboard, it may cause trouble or malfunctions.

Install in the reverse order of removal.