Continuity Inspection

WARNING: This page is about a different car, the 2005 Mazda RX-8 and 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Remove the CPP switch.

Verify that the continuity between CPP switch terminals B and D is as indicated in the table.

If there is no malfunction, perform the "CIRCUIT OPEN/SHORT INSPECTION ".
If there is any malfunction, replace the CPP switch.

Fig 1: Identifying Clutch Pedal Position (CPP) Switch

Courtesy of MAZDA MOTORS CORP.

CLUTCH PEDAL POSITION SWITCH SPECIFICATION

Measurement condition	Continuity
Push the rod.	No continuity
Except above	Continuity detected