LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Engine Mechanical (Service Information L3)) >> Engine Disassembly/Assembly
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Engine Disassembly/Assembly

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the engine and automatic transaxle (ATX). (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION [FN4A-EL] .)
  2. Disconnect the engine and manual transaxle (MTX). (See MANUAL TRANSAXLE REMOVAL/INSTALLATION [A65M-R] .)
  3. Remove the intake-air system. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
  4. Remove the exhaust system. (See EXHAUST SYSTEM REMOVAL/INSTALLATION .)
  5. Remove the generator. (See GENERATOR .)
  6. Remove the ignition coils. (See IGNITION COIL REMOVAL/INSTALLATION .)
  7. Remove the crankshaft position (CKP) sensor. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION .)
  8. Assemble in the reverse order of disassembly.
scientia non olet · About LEMON Manuals