LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MPV DX >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Engine Controls [Self-Diagnostics 2.3L]) >> Diagnostic Tests >> DTC P0113: Mass Airflow/Intake Air Temperature Sensor Circuit - High Input >> Detection Condition
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Detection Condition

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

The PCM monitors Mass Airflow/Intake Air Temperature (MAF/IAT) sensor signal at PCM 30-pin harness connector terminal "2E" (Blue/Black wire). If PCM detected MAF/IAT sensor voltage more than 4.84 volts, PCM determines MAF/IAT signal circuit has malfunction. This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction condition during first drive cycle. PENDING CODE is available if PCM detects malfunction condition. FREEZE FRAME DATA is available. DTC is stored in PCM memory.

scientia non olet · About LEMON Manuals