LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MPV DX >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical >> Overhaul >> Cylinder Block Assembly >> Cylinder Block
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Cylinder Block

  1. Inspect cylinder block deck surface for warpage. Replace cylinder block if deck warpage exceeds specification. See CYLINDER BLOCK  under ENGINE SPECIFICATIONS.
  2. Measure cylinder bore diameter just below top of bore, 2.0" (50 mm) below top of bore, and just above bottom of bore cylinder. Ensure cylinder bore diameter, taper and out-of-round are within specification. See Table 7. CYLINDER BLOCK  under ENGINE SPECIFICATIONS. Replace cylinder block if maximum bore diameter, taper or out-of-round is exceeded.
scientia non olet · About LEMON Manuals