LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> B4000 SE, 4WD, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls Trouble Shooting (4 Of 5) >> Diagnostic Index >> Starting Concerns
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Starting Concerns

DETECTION CONDITION AND POSSIBLE CAUSE

1  STARTING CONCERNS 
DESCRIPTION 
  • No Crank
STARTING CONCERNS INSPECTION

STEP INSPECTION ACTION
1 PRELIMINARY CHECKS
  • Perform the following preliminary checks:
    • Battery connections.
    • Starter relay connections.
    • Transmission in Park (A/T) or Neutral (MAT).
    • Clutch fully depressed (M/T).
    • Alarm/anti-theft devices.
    • Fuses/fuse links.
  • Are all the checks OK? 
Yes Go to step 2.
No Repair as necessary. Verify symptom no longer exists.
2 LISTEN FOR STARTER RELAY "CLICKING"
  • Is a "clicking" sound heard from the starter relay when the ignition key is turned to START? 
Yes Go to step 3.
No Go to step 5.
3 CHECK STARTING SYSTEM SECONDARY CIRCUITS
See STARTING SYSTEM SYMPTOM TROUBLESHOOTING CHART to check starter, starter ground, starter relay cable to starter, battery or other items as directed.
  • Is a fault indicated? 
Yes Repair as required.
No Go to step 4.
4 CHECK BASE ENGINE
  • Check for base engine concerns (such as seized/hydro-locked engine, damaged flywheel).
  • Is a fault indicated? 
Yes Repair as required.
No Verify test results.
See DIAGNOSTIC INDEX  to repair any additional symptoms
5 CHECK OPERATION OF OTHER ELECTRICAL ACCESSORIES
  • Do any other electrical accessories work? 
Yes Go to step 6.
No Check the charging system.
See CHARGING SYSTEM SYMPTOM CHART .
6 PERFORM PCM KOEO SELF TEST. ALSO RETRIEVE ANY CONTINUOUS MEMORY DTCS.
  • Are any DTCs displayed during Continuous Memory DTCs or Key ON, Engine OFF (KOEO) Self Tests? 
Yes Check for cause.
See DIAGNOSTIC TROUBLE CODE NUMBERS .
No Go to step 7.
7 CHECK STARTING SYSTEM PRIMARY CIRCUITS Yes Go to step 8.
No Service as required.
8
  • Perform After Repair Procedure to ensure customer's concern has been resolved.
See ON-BOARD DIAGNOSTIC TESTS .