LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> B3000 SX, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 425 (Lighting System) >> License Plate Light Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

License Plate Light Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the rear finisher. (See REAR FINISHER REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
    Fig 1: License Plate Light Removal Sequence
    G03645573Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals