Specifications Index
626 SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | GENERAL SERVICING PROCEDURES | ||
| Torque | NA | ||
| Axle Nut/Hub Nut (Front) | 131-173 Ft. Lbs. (177-235 N.m) | ||
| Battery | NA | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | ||
| Drum Brakes | DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | DESCRIPTION & OPERATION | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | BELT ADJUSTMENT | ||
| Belt Routing | 626 | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 14.4-17.6 psi | ||
| Thermostat R & I | |||
| 2.0L 4-Cyl. | THERMOSTAT | ||
| 2.5L V6 | THERMOSTAT (626) | ||
| Water Pump R & I | |||
| 2.0L 4-Cyl. | WATER PUMP | ||
| 2.5L V6 | WATER PUMP | ||
| Engine Mechanical | |||
| 2.0L 4-Cyl. | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | 57-71 psi (4-5 kg/cm 2 ) at 3000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 2.5L V6 | |||
| Compression | ENGINE COMPRESSION | ||
| Oil pressure | 48-71 psi (3.4-5.0 kg/cm2 ) at 3000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | |||
| 2.0L 4-Cyl. | 71-76 Ft. Lbs. (97-102 N.m) | ||
| 2.5L V6 | 45-49 Ft. Lbs. (61-66 N.m) | ||
| Fuel System | |||
| Pressure Specification | 71-92 psi (5.0-6.5 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | FUEL LINE PRESSURE | ||
| Fuel Filter Location and R & I | REMOVAL & INSTALLATION (626) | ||
| Ignition | |||
| Firing Order & Cylinder Identification | |||
| 2.0L 4-Cyl. | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| 2.5L V6 | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | |||
| 2.0L 4-Cyl. | See appropriate graphic under FIRING ORDER . | ||
| 2.5L V6 | See appropriate graphic under FIRING ORDER . | ||
| Spark Plug | |||
| 2.0L 4-Cyl. (NGK BRK5E-11 or BRK6E-11) | |||
| Gap | .028-.031 in. (.7-.8 mm) | ||
| Torque | 11-16 Ft. Lbs. (15-22 N.m) | ||
| 2.5L V6 (Nippon Denso PKJ16CR8 or PKJ20CR8) | |||
| Gap | .040-.043 in. (1.0-1.1 mm) | ||
| Torque | 11-16 Ft. Lbs. (15-22 N.m) | ||
| Starting | |||
| Starter | DESCRIPTION & OPERATION | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 66-86 Ft. Lbs. (89-117 N.m) | ||