LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> 626 ES, 2.0 C, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - Basic Testing - 2.3L) >> Fuel System >> Fuel Pressure >> Injector Fuel Leakage
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Injector Fuel Leakage

WARNING: This page is about a different car, the 1997 Mazda Millenia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using mechanics wire, secure each fuel injector to fuel rail. Disconnect fuel injector connectors. Remove fuel rail assembly from intake manifold. See appropriate engines article in the ENGINES section. Reconnect fuel lines to fuel rail. Locate data link connector in left side of engine compartment.
  2. Connect a jumper wire between data link connector terminals F/P and GND. See Figure . Turn ignition on. Tilt injectors about 60 degrees and check injector nozzles for fuel leaks. Fuel leakage should be less than one drop every 2 minutes. If fuel leakage exists, replace injector.
scientia non olet · About LEMON Manuals