Component Tests: CLOCKSPRING
Remove driver's side air bag. See appropriate AIR BAG RESTRAINT SYSTEMS article. Remove steering column lower cover. Disconnect all clockspring harness connectors. Continuity should exist between indicated terminals. CLOCKSPRING CONTINUITY TEST table. See Fig 1. If continuity is not as specified, replace clockspring.
CLOCKSPRING CONTINUITY TEST
| Step No. | Continuity Between Terminals |
|---|---|
| 1 | 1A & 3A |
| 2 | 1B & 3B |
| 3 | 2A & 4A |
| 4 | 2B & 4B |
| 5 | 2C & 4C |
| 6 | 2D & 4D |