LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1998 >> MPV LX, 3.0 3 >> Repair and Diagnosis (Single Page) >> Electrical >> Starter >> Bench Testing >> Commutator Test >> MPV
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Commutator Test: MPV

  1. Clean surface and polish with No. 400 sandpaper if required. If surface is scored, out of round or pitted, turn commutator in a lathe.
  2. Maximum commutator runout and minimum diameter of commutator must not exceed specification after turning.
  3. Standard commutator mica undercut depth is .020" (.50 mm). Minimum mica undercut depth is .008" (.20 mm). If not within specification, undercut to standard depth.
scientia non olet · About LEMON Manuals