LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1997 >> Protege ES L4-1839cc 1.8L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Vehicle Speed Sensor >> Service and Repair
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Vehicle Speed Sensor: Service and Repair




REPLACEMENT
1. Disconnect the negative battery cable.
2. Remove the battery, air cleaner component, and battery carrier.
3. Disconnect the input/turbine speed sensor connector.
4. Remove the input/turbine speed sensor.
5. Apply ATF to a new O-ring and install it on a new input/turbine speed sensor.
6. Install the input/turbine speed sensor. Tighten to:

7.9 - 10.7 Nm (70 - 95 inch lbs.).

7. Connect the input/turbine speed sensor connector.
8. Install the battery carrier, air cleaner component, and battery.
9. Connect the negative battery cable.








scientia non olet · About LEMON Manuals