With SST-New Generation Star Tester

Using SSTs (NGS)




1. Connect the Special Service Tools (SST)s New Generation Star (NGS) tester to the data link connector 2 located under the driver side dashboard.
2. Verify that the throttle valve is at the closed throttle position.
3. Turn the ignition switch to ON.




4. Select the "PID/DATA MONITOR AND RECORD function on the NGS display.
5. Select "TP V" on the NGS display. NGS measures and shows the voltage.

Specification:
Closed throttle position: 0.1 - 1.1 V
Wide open throttle: 2.8 - 4.5 V

(Verify that the voltage increase is directly proportioned to the throttle valve opening angle.)

6. If not as specified, adjust the throttle position sensor. (Refer to Throttle Position Sensor/Adjustments).

Adjustments