LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1997 >> B4000 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Engine Controls - Remove/Install/Overhaul) >> Ignition System >> Crankshaft Position Sensor >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

WARNING: This page is about a different car, the 1997 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Remove alternator. Drain cooling system and remove water outlet tube. Disconnect crankshaft position sensor wiring harness connector. Remove sensor mounting bolt and pry sensor from front of engine. To install, reverse removal procedure. See TORQUE SPECIFICATIONS  . Ensure coolant level is correct.

scientia non olet · About LEMON Manuals