Air Bag Control Module: Service and Repair

1. Carry out the "Before Servicing" procedure.
2. Remove the front console, side wall and undercover.
3. Remove in the order shown.
4. Install in the reverse order of removal, referring to Installation note.
5. Follow the troubleshooting flowchart to verify that the air bag system is operating normally.

SAS Unit:

1. Connector
2. Nut
3. SAS unit
4. Nut
5. Bracket
6. Nut
7. Bracket

Installation Note:

Installation Note

SAS unit and bracket
1. If the bracket mounting area is damaged, repair the area to its original shape.
2. Position the SAS unit and bracket with the arrow on the SAS unit facing toward the front of vehicle. Install them and tighten the nuts to the specified torque.