LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1996 >> MX-6 L4-1991cc 2.0L DOHC >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Timing >> Testing and Inspection >> With Automatic Transaxle
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

With Automatic Transaxle

PREPARATION
1. Warm up the engine to normal operating temperature.
2. Shift the selector lever to P range.
3. Turn off all electrical loads.
- Headlight
- Blower
- Rear window defroster
- Power steering

4. Wait until the cooling fan stops.




5. Connect the Special Service Tools (SST)s New Generation Star (NGS) tester to the data link connector-2 and select the "PID/DATA MONITOR AND RECORD" function.

IGNITION TIMING
1. Perform Preparation. (Refer to above.)
2. Connect a timing light to the engine.
3. Verify that the ignition timing is within specification.

Specification: BTDC 6-18°




4. If the ignition timing is not within specification, check the installation of distributor.

scientia non olet · About LEMON Manuals