Crankshaft Position Sensor: Service and Repair

REPLACEMENT
- Remove the undercover.
- Remove the crankshaft position sensor.
- Install in the reverse order of removal.

Tightening torque: 7.9 - 10.7 Nm (70 - 95.4 in.lbs.)

AIR GAP




- Measure the air gap between the crankshaft pulley and the crankshaft position sensor by using a feeler gauge.

Specification: 0.5 - 1.5 mm (0.020 - 0.059 in.)

- If not as specified, replace the crankshaft pulley or the crankshaft position sensor.