LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1996 >> B3000 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 668 (Control System (HVAC)) >> Rear Resistor Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Rear Resistor Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the rear side trim (RH). (See REAR SIDE TRIM REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
    Fig 1: Removing Rear Resistor
    G03700734Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals