Specifications Index
(PROTEGE) SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM GENERAL SERVICING | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut (Front) | 173-235 Ft. Lbs. (235-319 N.m) | ||
| Battery | See BATTERY SPECIFICATIONS table under CAPACITIES - 1.5L or CAPACITIES - 1.8L . | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | ||
| Drum Brakes | DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | DESCRIPTION & OPERATION | ||
| Torque | GENERATOR & REGULATOR - MITSUBISHI | ||
| Drive Belts | |||
| Adjustment | ADJUSTMENT SPECIFICATIONS | ||
| Belt Routing | DRIVE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 10.7-14.9 psi | ||
| Thermostat R & I | n/a | ||
| Water Pump R & I | |||
| 1.5L | WATER PUMP | ||
| 1.8L | WATER PUMP | ||
| Engine Mechanical | |||
| 1.5L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | 15-28 psi (1.0-2.0 kg/cm2 ) at 1000 RPM, and 43-57 psi (3.0-4.0 kg/cm2 ) at 3000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 1.8L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil pressure | 15-28 psi (1.0-2.0 kg/cm2 ) at 1000 RPM, and 43-57 psi (3.0-4.0 kg/cm2 ) at 3000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | 71-76 Ft. Lbs. (96-103 N.m) | ||
| Fuel System | |||
| 1.5L | |||
| Pressure Specification | 64-92 psi (4.5-6.5 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE | ||
| Fuel Filter Location and R & I | FUEL SYSTEM | ||
| 1.8L | |||
| Pressure Specification | 64-92 psi (4.5-6.5 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE | ||
| Fuel Filter Location and R & I | FUEL SYSTEM | ||
| Ignition | |||
| 1.5L | |||
| Firing Order & Cylinder Identification | FIRING ORDER | ||
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | IGNITION SYSTEM | ||
| 1.8L | |||
| Firing Order & Cylinder Identification | FIRING ORDER | ||
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | IGNITION SYSTEM | ||
| Spark Plug | |||
| 1.5L & 1.8L 4-Cyl. (NGK BKR5E-11 or BKR6E-11) | |||
| Gap | 0.040-0.043 in. (1.0-1.1 mm) | ||
| Torque | 11-16 Ft. Lbs. (15-22 N.m) | ||
| Starting | |||
| Direct Drive | |||
| Starter | DESCRIPTION | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Reduction Gear | |||
| Starter | DESCRIPTION & OPERATION | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 65-87 Ft. Lbs. (88-118 N.m) | ||