October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fuel System Priming

CAUTION: After performing fuel system repairs, use following procedure to prime fuel system before starting engine. This prevents excessive engine cranking and allows system to be leak-tested.

Connect jumper wire between GND and F/P terminals of data link connector. See Fig 1 . Turn ignition on for about 10 seconds and then off. Disconnect jumper wire.

Fig 1: Identifying Data Link Connector Terminals

Courtesy of MAZDA MOTORS CORP.