LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1995 >> MX-3 L4-1598cc 1.6L DOHC >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - A/T >> Control Module >> Testing and Inspection >> Tcm Pin Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Tcm Pin Test

INSPECTION
1. Disconnect the transaxle control module (TCM) connectors.


View: Special Service Tool (SST) Connections:





2. Connect the special service tools (SST)s (Engine Signal Monitor and Adapter Harness) to the transaxle control module as shown.


View: Overlay Sheet SST-49 G018 904:





3. Place the SST (Overlay Sheet) on the Engine Signal Monitor.
4. Turn the ignition switch ON, and check the transaxle control module terminal voltage, referring to TCM Terminal Voltage Charts.

5. If any transaxle control module terminal input/output voltage is incorrect, check the related input or output devices and wiring. If no problem is found in these devices, replace the transaxle control module.


View: Special Service Tool (SST):





CAUTION: Applying voltage to terminals A and B on the SST-engine signal monitor will damage the SST.


scientia non olet · About LEMON Manuals