LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1995 >> MX-3 L4-1598cc 1.6L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Vehicle Speed Sensor >> Service and Repair >> With Automatic Transaxle
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

With Automatic Transaxle

REMOVAL
- Disconnect negative battery cable.
- Disconnect sensor connector.
- Remove the vehicle speedometer sensor from the transaxle case.


INSTALLATION
- Lubricate a new O-ring with automatic trans. fluid.
- Install the O-ring onto the vehicle speedometer sensor.
- Install the sensor into the transaxle case and torque sensor retaining bolt to specification.

Torque: 5.0 - 6.8 Nm (44 - 60 in.lb.)

- Connect sensor connector
- Connect negative battery cable.
scientia non olet · About LEMON Manuals