LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1995 >> B3000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Controls - Adjustments) >> Throttle Position (TP) Sensor >> Throttle Position (TP) Sensor Continuity >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Throttle Position (TP) Sensor Continuity: Inspection

WARNING: This page is about a different car, the 1995 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch to OFF position and throttle valve to closed throttle position. Disconnect TP sensor connector. Connect ohmmeter between terminals "C" and "D" of TP sensor connector. SeeFigure . Continuity should exist. If continuity does not exist, adjust TP sensor. See ADJUSTMENT procedure below.
  2. Insert a feeler gauge of specified thickness between throttle lever and throttle stop screw. Connect ohmmeter between terminals "C" and "D" of TP sensor connector. See Figure . If continuity is not as specified, adjust TP sensor. See ADJUSTMENT procedure below.
scientia non olet · About LEMON Manuals