LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1994 >> MPV LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Engine Controls - System/Component Tests) >> Air Induction Systems >> Turbocharger >> Control Actuator
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Control Actuator

WARNING: This page is about a different car, the 1994 Mazda RX-7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure engine is cool. Remove hose connected to actuator. Connect air pressure source to pressure gauge. See Fig 1 . Apply air pressure to actuator.
    CAUTION: DO NOT allow pressure to exceed 11 psi (.8 kg/cm2 ).
  2. Apply 7 psi (0.5 kg/cm2 ) of compressed air. Ensure actuator rod moves when air pressure is applied. If actuator rod does not move, replace control actuator.
Fig 1: Testing Control Actuator (RX7)
G93I80323Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals