LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1994 >> B4000 LE, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Quick Test >> Continuous Monitor Mode (Wiggle Test) >> KOER Wiggle Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

KOER Wiggle Test

1)  Turn ignition off. Connect test equipment. Start engine. Activate self-test using jumper lead or diagnostic tester. Wait 10 seconds, then deactivate and reactivate self-test. DO NOT turn engine off. KOER wiggle test mode is now activated.

2)  Tap, move and wiggle suspect sensor and/or harness area. If a fault is detected, scan tester should indicate a tone or light, and VOM will perform needle sweep and/or MIL will come on. A service code may be stored in continuous memory. Retrieve code, and perform appropriate test. See SERVICE CODE REFERENCE.

scientia non olet · About LEMON Manuals