LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1994 >> 929 V6-3.0L DOHC >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Neutral Safety Switch >> Service and Repair
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Neutral Safety Switch: Service and Repair

Replacement
Refer to "Adjustment" below, for replacement of the park/neutral switch.


Adjustment




1. Remove the selector rod from the manual shaft lever.





2. Move the manual shaft to N range position.
3. Loosen the park/neutral switch mounting bolts.
4. Align the holes of the park/neutral switch and the manual shaft lever by inserting an approx. 4.0 mm (0.157 in.) outer diameter pin.
5. Tighten the park/neutral switch mounting bolts and remove the pin.

Tightening Torque: 2.5-3.9 Nm (22-34 in.lb.)

6. Recheck the continuity of the park/neutral switch.
7. If not correct, replace the park/neutral switch.
8. Install the selector rod to the manual shaft lever.

scientia non olet · About LEMON Manuals