LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1993 >> MX-3 Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Crank Angle Sensor >> Removal & Installation (Miata)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation (Miata)

Disconnect sensor connector. Remove hold-down bolt. Remove sensor. To install, reverse removal procedure. Adjust ignition timing. See ADJUSTMENTS article. Tighten bolt to specification. See the TORQUE SPECIFICATIONS  table.

scientia non olet · About LEMON Manuals