LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1992 >> 929 >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance Reminder Light (Reset Procedures) >> Tire Pressure Monitor System Reminder >> TPMS Reminder Reset - Procedure 05
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

TPMS Reminder Reset - Procedure 05

NOTE: This vehicle is equipped with a Direct TPM System. Tire pressure sensors are installed on the wheels. For vehicles with an Indirect TPMS, see TPMS REMINDER RESET - PROCEDURE 04 .

When the TPMS warning light illuminates, and the warning beep sound is heard (about 3 seconds), tire pressure is too low in one or more tires. Fill tire to the specified pressure and drive the vehicle at least 16 mph (25 km/h) for 10 minutes. Ensure the TPMS warning light goes out.

The following procedure allows the TPMS to recognize a tire pressure sensor's unique ID signal code whenever tires or wheels are changed.

  1. Adjust all four tire pressures to the specification while the tires are cold.
  2. Switch the ignition ON, then back to ACC or OFF.
  3. Wait for about 15 minutes.
  4. After about 15 minutes, drive the vehicle at least 16 mph (25 km/h) for 10 minutes and the tire pressure sensor ID signal code will be registered automatically.
NOTE: If the vehicle is driven within 15 minutes of changing tires, and the tire pressure monitoring system warning light still flashes, park the vehicle for another 15 minutes, after which the sensor ID signal code should register upon driving the vehicle for 10 minutes.
scientia non olet · About LEMON Manuals