LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1991 >> B2200 Base, 2D Pickup, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - EFI >> Engine Sensors & Switches >> Oxygen (O2) Sensor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Oxygen (O2) Sensor

  1. Warm engine to operating temperature. Operate engine at idle. Disconnect O2 sensor electrical connector. Connect voltmeter between connector and ground. Increase engine speed to 4500 RPM until voltmeter indicates about .7 volt.
  2. Observe voltmeter while rapidly accelerating and decelerating engine speed. Voltage should be 0.5-1.0 volt during acceleration and 0.0-0.4 volt during deceleration. Replace O2 sensor as necessary.
scientia non olet · About LEMON Manuals