LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1989 >> 626 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (System/Component Tests) >> Relays, Solenoids, Motors & Modules >> A/C Cut-Out Control System >> Testing
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

A/C Cut-Out Control System: Testing

WARNING: This page is about a different car, the 1989 Mazda RX-7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn A/C, blower and ignition switches on. DO NOT start engine. Shift transmission into a drive gear. Open throttle fully. Listen for A/C clutch disengaging and reengaging after 7 seconds.
  2. If system does not test as indicated, check operations of related switches and relays. See PIN VOLTAGE CHART S and SENSOR RANGE CHARTS article.
scientia non olet · About LEMON Manuals