LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1989 >> 323 Base, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Mechanical >> Engine Cooling Fan >> Component Testing >> THERMO Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

THERMO Switch

Remove thermo switch, located left of distributor, and check continuity. Suspend switch in container filled with water and heat. See Figure . Switch is normally closed. Continuity should exist at less than 207°F (97°C) and circuit should open above specified temperature. If continuity does NOT exist as indicated, replace thermo switch.

scientia non olet · About LEMON Manuals