LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1988 >> RX-7 GXL, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> CEC System >> Component Testing >> System Components >> Crank Angle Sensor
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Crank Angle Sensor

  1. Remove sensor connector. Note terminal identification. See Figure . Using ohmmeter, check resistance at specified terminals. Resistance must be within specification. See CRANK ANGLE SENSOR RESISTANCE  table.
CRANK ANGLE SENSOR RESISTANCE

Terminal Ohms
G1 & G2 110-210
NE1 & NE2 110-210
scientia non olet · About LEMON Manuals