LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1988 >> RX-7 Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Hot Start Assist System >> System Testing >> Pressure Regulator Control Solenoid Valve
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Pressure Regulator Control Solenoid Valve

  1. Disconnect hose from solenoid. Blow through port "A". See Fig 1 . Air should flow from port "B". Remove connector from valve.
  2. Apply battery voltage and ground to proper terminals. See Fig 1 . Blow through port "A". Air should flow through air filter.
Fig 1: Testing Pressure Regulator Control Solenoid Valve
G65825Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals