TP Sensor Continuity (MILLENIA, MPV)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1998 Mazda Protege, 1998 Mazda Millenia, 1998 Mazda MPV, 1998 Mazda B4000, and 1998 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.

TP SENSOR CONTINUITY (MILLENIA, MPV)

Test Condition ⁽¹⁾

⁽²⁾ Continuity Between Terminals "C" & "D"

Millenia

2.3L

.008" (.19 mm)

Yes

.015" (.37 mm)

2.5L

.006" (.15 mm)

Yes

.020" (.5 mm)

MPV

.006" (.15 mm)

Yes

.020" (.5 mm)

⁽¹⁾	Insert feeler gauge of specified thickness between throttle lever and throttle stop screw.

⁽²⁾	See Fig 1.

Fig 1: TP Sensor Connector Terminals (Millenia & MPV)

Courtesy of MAZDA MOTORS CORP.