LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1985 >> RX-7 GSL, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Evaporation System >> Component Testing >> Evaporation Line
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Evaporation Line

  1. Disconnect evaporation hose from canister. Connect detached hose to a "U" tube type pressure gauge filled with water.
  2. Gradually apply low air pressure into "U" tube so that difference of water level reaches 14" (356 mm).
  3. Bind inlet of "U" tube and leave bound for 5 minutes. If water level drops no more than 1" (25 mm) after 5 minutes, evaporation line is in good condition.
scientia non olet · About LEMON Manuals