September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Neutral Switch
- On manual transmission models, raise and support vehicle. Disconnect electrical connector from switch (located on output shaft housing.). Connect ohmmeter to switch terminals.
- Continuity should exist when transmission is in Neutral and no continuity in any other gear position. If switch does not operate as outlined, replace neutral switch.
- On automatic transmission models, raise and support vehicle. Apply parking brake and block wheels. Start engine and operate at idle. Disconnect electrical connector from switch (located on output shaft housing).
- Connect ohmmeter to switch terminals. Continuity should exist when transmission is in Neutral and no continuity in any other gear position. If switch does not operate as outlined, replace neutral switch.