LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1979 >> B2000 Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Exhaust Emissions System - Catalytic Converter >> Testing >> Heat Hazard Warning System >> Warning Light Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Warning Light Test

Turn ignition on. Warning lamp should also come on. Start engine and warning lamp should go off. Disconnect the coupler of the heat hazard sensor (under floor mat). Connect a jumper wire to both terminals in the coupler. The warning lamp should come on.

scientia non olet · About LEMON Manuals