September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Steering Column Tilt Motor: Installation
- To install, reverse the removal procedure.
- If equipped with memory steering column, use the steering column control switch and set the tilt motor soft stops as follows.
- Move the column upward until it reaches the end of travel.
- Move the column in the same direction until it reaches the end of travel again.
- Move the column downward until it reaches the end of travel.
- Move the column in the same direction until it reaches the end of travel again.
Courtesy of FORD MOTOR COMPANY
|
- If equipped with memory steering column, use the steering column control switch and set the telescopic motor soft stops as follows.
- Move the column rearward until it reaches the end of travel.
- Move the column in the same direction until it reaches the end of travel again.
- Move the column forward until it reaches the end of travel.
- Move the column in the same direction until it reaches the end of travel again.
Courtesy of FORD MOTOR COMPANY
|