Register - Center: Removal

WARNING: This page is about a different car, the 2017 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

1.

Remove the defroster grille panel.

Courtesy of FORD MOTOR COMPANY

2.

Remove the instrument panel center bezel.
- Remove the screws and position aside instrument panel center bezel.
- Disconnect the sunload sensor electrical connector.
- Remove the instrument panel center bezel.
- Tighten to 2.5 Nm (23 lb-in).

Courtesy of FORD MOTOR COMPANY

3.

Release the center register clips and remove the center registers.

Courtesy of FORD MOTOR COMPANY