September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Fuel Pump Control Module: Installation
- 1.
Install the FPCM, then install the FPCM bolts and tighten to 9 Nm (80 lb-in).
 Courtesy of FORD MOTOR COMPANY
|
- 2.
Connect the FPCM electrical connector.
 Courtesy of FORD MOTOR COMPANY
|
- 3.
Install the LR splash shield, then install the LR splash shield retainers and tighten to 3.0 Nm (27 lb-in).
 Courtesy of FORD MOTOR COMPANY
|