LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2015 >> MKX AWD >> Repair and Diagnosis (Single Page) >> Quick Lookups >> DTC Index >> Information System And Entertainment System DTCS >> Front Controls Interface Module (FCIM) DTC Chart
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Front Controls Interface Module (FCIM) DTC Chart

DTC INDEX

DTC Description Action
B00D5:01 Restraint System Passenger Disable Indicator: General Electrical Failure CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC B00D5:01 is still present, INSTALL a new Front Controls Interface Module (FCIM). REFER to Front Controls Interface Module (FCIM) . REPEAT the self-test.
B113C:11 Hazard Switch Illumination: Circuit Short To Ground CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC B113C:11 is still present, INSTALL a new Front Controls Interface Module (FCIM). REFER to Front Controls Interface Module (FCIM) . REPEAT the self-test.
B1202:01 Restraint System Passenger Enable Indicator: General Electrical Failure CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC B1202:01 is still present, INSTALL a new FCIM. REFER to Front Controls Interface Module (FCIM) . REPEAT the self-test.
U0155:00 Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information GO to Pinpoint Test V .
U0257:00 Lost Communication With Front Controls / Display Interface Module: No Sub Type Information GO to Pinpoint Test AC .
U0423:00 Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information RETRIEVE and FOLLOW other DTCs present in the Instrument Panel Cluster (IPC).
U2013:63 Switch Pack: Circuit / Component Protection Time-Out
NOTE: Do not press any FCIM buttons when carrying out the self-test.
CLEAR the DTCs. REPEAT the self-test. If DTC U2013:63 is still present, INSTALL a new FCIM. REFER to Front Controls Interface Module (FCIM) . REPEAT the self-test.
U201A:51 Control Module Main Calibration Data: Not Programmed REFER to Module Configuration .
U3000:41 Control Module: General Checksum Failure CLEAR the DTCs. REPEAT the self-test. If DTC U3000:41 is still present, INSTALL a new FCIM. REFER to Front Controls Interface Module (FCIM) . REPEAT the self-test.
U3000:42 Control Module: General Memory Failure CLEAR the DTCs. REPEAT the self-test. If DTC U3000:42 is still present, INSTALL a new FCIM. REFER to Front Controls Interface Module (FCIM) . REPEAT the self-test.
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to Pinpoint Test AD .
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to Pinpoint Test AE .
scientia non olet · About LEMON Manuals