October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Programming the Autolock Feature Using the Keyless Entry Keypad
NOTE:
The autolock feature can be activated or deactivated independently of the auto-unlock feature.
NOTE:
The autolock feature of the SJB can also be configured ON or OFF with the scan tool. For additional information on module configuration, refer to
Module Configuration
.
- 1.
Turn the ignition key to the OFF position and close all vehicle doors.
- 2.
Enter the factory set 5-digit keyless entry keypad code.
- 3.
Press and hold the 3/4 button on the keypad. While holding the 3/4 button, press the 7/8 button.
- 4.
Release the 7/8 button, then release the 3/4 button. The horn chirps once if the autolocks are disabled or twice (one short chirp followed by a honk) if the autolocks are enabled.