LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2014 >> MKX AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Acceleration Control System >> Removal And Installation >> Accelerator Pedal >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

  1. NOTE: To prevent setting DTCs, make sure the ignition switch is in the OFF position prior to disconnecting the accelerator pedal electrical connectors.

    Disconnect the accelerator pedal sensor electrical connector.

  2. Remove the 3 nuts and the accelerator pedal and sensor assembly.
    • To install, tighten to 7 Nm (62 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals