HVAC - Climate Control System: Specifications
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Motorcraft® PAG Refrigerant Compressor Oil YN-12-D |
WSH-M1C231-B | 3.5L GTDI 220 ml (7.44 fl oz) 3.5L TiVCT 250 ml (8.45 fl oz) |
| Motorcraft® R-134a Refrigerant YN-19 (US); CYN-16-R (Canada) |
WSH-M17B19-A | 3.5L GTDI 1.11 kg (39 oz) (2.44 lb) 3.5L TiVCT 1.05 kg (37 oz) (2.31 lb) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| A/C compressor bolts | 25 | 18 | - |
| A/C compressor fitting nuts (suction and discharge) | 20 | - | 177 |
| A/C compressor mounting stud | 9 | - | 80 |
| A/C compressor nut | 25 | 18 | - |
| A/C compressor pressure relief valve | 10 | - | 89 |
| A/C clutch disc and hub bolt | 14 | - | 124 |
| Auxiliary evaporator inlet line fitting nut | 15 | - | 133 |
| Auxiliary evaporator outlet line fitting nut | 15 | - | 133 |
| Condenser bolts - 2.0L, 3.5L Gasoline Turbocharged Direct Injection (GTDI) | 8 | - | 71 |
| Condenser bolts - 3.7L Ti-VCT | 6 | - | 53 |
| Condenser fitting nuts (inlet and outlet) | 15 | - | 133 |
| Cross-vehicle beam nuts | 30 | 22 | - |
| Evaporator outlet line fitting nut | 15 | - | 133 |
| Heater core and evaporator core housing bolts | 9 | - | 80 |
| High-pressure Schrader-type valve | 2.5 | - | 22 |
| High-pressure service gauge port valve cap | 0.8 | - | 7 |
| Low-pressure Schrader-type valve | 1.8 | - | 16 |
| Low-pressure service gauge port valve cap | 0.8 | - | 7 |
| Receiver/drier bolts | 9 | - | 80 |
| Receiver/drier outlet fitting nut | 15 | - | 133 |
| Thermostatic Expansion Valve (TXV) bolts | 8 | - | 71 |
| TXV fitting nut | 8 | - | 71 |
| TXV manifold and tube bracket bolt | 15 | - | 133 |
| TXV manifold and tube clamp bracket bolt | 9 | - | 80 |
| Strut tower brace nuts | 30 | 22 | - |