LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2013 >> MKS Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 475 (Module Communications Network (Except Electric Vehicle)) >> Diagnosis And Testing >> Communications Network >> Pinpoint Tests >> Pinpoint Test C : The Restraints Control Module (RCM) Does Not Respond To The Scan Tool >> Notes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Pinpoint Test C : The Restraints Control Module (RCM) Does Not Respond To The Scan Tool: Notes

WARNING: This page is about a different car, the 2015 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

The RCM Does Not Respond To The Scan Tool 

Diagnostic Overview 

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods

Refer to Wiring Diagrams MODULE COMMUNICATIONS NETWORK for schematic and connector information.

Refer to Wiring Diagrams SUPPLEMENTAL RESTRAINT SYSTEM for schematic and connector information.

Normal Operation and Fault Conditions 

The RCM communicates with the scan tool through the HS-CAN.

Possible Causes 

Visual Inspection and Diagnostic Pre-checks 

Verify BCM fuse 86 (10A) is OK.

scientia non olet · About LEMON Manuals