General Specification
GENERAL SPECIFICATION
| Item | Specification |
|---|---|
| Starting System | |
| Normal engine cranking speed | 140-220 RPM |
| Starter motor armature shaft maximum runout | 0.11 mm (0.004 in) |
| Starter motor brush manufactured length | 16.8 mm (0.66 in) |
| Starter motor brush spring tension | 18 N (65 oz) |
| Starter motor commutator maximum runout | 0.12 mm (0.005 in) |
| Starter motor diameter | 101.6 mm (4.0 in) |
| Starter motor maximum load | 800 amps |
| Starter motor minimum stall torque (at 5 volts) | 14.7 Nm (10.8 lb-ft) |
| Starter motor no load current draw | 60-80 amps |
| Starter motor normal load current draw | 130-220 amps |
| Starter circuit maximum voltage drop (engine at normal operating temperature) | 0.5 volts |