LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2010 >> MKX AWD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Information System And Entertainment System >> Removal And Installation >> Audio Digital Signal Processing (DSP) Module >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

    NOTE: Module configuration is required when a new audio Digital Signal Processing (DSP) module is being installed.
  1. Upload the audio DSP  module configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
  2. Remove the subwoofer speaker. For additional information, refer to SPEAKER - SUBWOOFER  .
  3. Disconnect the audio DSP  module electrical connectors.
  4. Remove the 3 screws, the nut, and the audio DSP  module.
  5. To install, reverse the removal procedure.
    • Download the configuration information to the audio DSP  module. For additional information, refer to PMI in MODULE CONFIGURATION .
scientia non olet · About LEMON Manuals